|
|
 |
|
Embedded Boards |
|
|
CompactPCI INTEL Board |
 |
|
Intel® Pentium® M processor family, up to 2.26 GHz |
|
Up to 2 MB L2 on-die cache running at CPU speed |
|
82855GME GMCH and 6300ESB (Hance Rapid) ICH chipset |
|
400 MHz processor system bus
PC2700 (DDR333) DDR SDRAM memory with ECC:
Up to 1 GB of soldered memory,
Up to 1 GB memory module in 200-pin SODIMM socket
Compliant with CompactPCI Specification PICMG® 2.0 R3.0
System master operation
64-bit /33 MHz master interface
3.3V / 5.0V compatible (default configuration is 5.0V)
Integrated 3D high performance VGA controller ,
64 MB memory shared with system
CRT-displays support with resolutions of up to 2048 x 1536 pixels at 16 bits and 75 Hz
LVDS interface support via Rear I/O
Two Gigabit Ethernet interfaces ,
One Fast Ethernet interfaces ,
Two EIDE Ultra ATA/100 interfaces ,
Onboard CompactFlash Type I socket ,
Four serial ports ,
Up to 5 USB 2.0 ports ,
PS/2 keyboard and mouse interface (*),
Floppy disk interface ,
Parallel port (*)
Hardware Monitor (LM82) ,
Watchdog timer ,
Additional counters and timers integrated in the ICH ,
Real time clock with Battery backup ,
1 MB on-board FWH
4HP, 6U CPCI form-factor
LiveInsertion support
Rear I/O capability
Passive or active heatsink solution
Phoenix® BIOS
VxWorks, Windows XP Embedded, QNX, Windows2000/XP/CE, Linux.
Available in Commercial, Industrial, Rugged Air-cooled & Conduction Cooled Builds |
|
 |
|
|
|
|
VME INTEL Board |
|
|
Intel® Pentium® M processor family, up to 2.26 GHz |
|
Up to 2 MB L2 on-die cache running at CPU speed |
|
82855GME GMCH and 6300ESB (Hance Rapid) ICH chipset |
|
400 MHz processor system bus
PC2700 (DDR333) DDR SDRAM memory with ECC:
Up to 1 GB of soldered memory ,
Up to 1 GB memory module in 200-pin SODIMM socket
VMEbus
ANSI/VITA 1, VME64
ANSI/VITA 1.1, VME64 Extensions
ANSI/VITA 1.5, 2eSST
Integrated 3D high performance VGA controller
64 MB memory shared with system
CRT-displays support with resolutions of up to 2048 x 1536 pixels at 16 bits and 75 Hz
LVDS interface support via Rear I/O
Four Gigabit Ethernet interfaces (via PCI-X bus):10Base-T, 100Base-TX and 1000Base-T
Two EIDE Ultra ATA/100 interfaces ,
Onboard CompactFlash Type I socket
Three serial ports (*),Up to six USB 2.0 ports (*),PS/2 keyboard and mouse interface(*)
Floppy disk interface ,
Parallel port (*) ,
Hardware Monitor (LM82) ,
Watchdog timer
Additional counters and timers integrated in the ICH
Real time clock with Battery backup
1 MB on-board FWH
4HP, 6U VME form-factor
LiveInsertion support
Rear I/O capability
Passive or active heatsink solution
Phoenix® BIOS
VxWorks, Windows XP Embedded, QNX, Windows2000/XP/CE, Linux.
Available in Commercial, Industrial, Rugged Air-cooled & Conduction Cooled Builds
|
|
|
|
|
|
|
CompactPCI PowerPC |
|
|
PowerPC 750/ 750GX/ 7410/ 7455 at maximum available |
|
frequency with 1 MByte external L2 cache |
|
GLOBAL MEMORY AT CACHE SPEED |
|
Up to 512 MBytes SDRAM at 800 MBytes/s peak
HIGH-PERFORMANCE COMPACTPCI INTERFACE
CES-designed PowerPC-to-CompactPCI bridge
Automatic selection of CompactPCI slot or peripheral slot
Independent sixteen-channel DMA on CompactPCI
ADDITIONAL FEATURES
Two onboard dual PMC slots
Multiple arbiters for memory bandwidth allocation
High-speed synchronization and message passing
32 MBytes of NOR Flash EPROM,
256 MBytes of NAND Flash EPROM
Dual full duplex 10/100 Base-Tx Ethernet
Four serial interface ports (2 x RS-232 and 2 x RS-232 / RS-422)
Multiple thermal sensors
CPU speed throttle logic (100 MHz - 800 MHz)
Optimized Flash File System (POSIX compliant)
User-specific rear I/O lines
Flexible 3U/6U Configurations
VxWorks, Linux, RTLinux, Time Sys, LynxOS, Integrity
Available in Commercial, Industrial, Rugged Aircooled & Conduction Cooled Builds |
|
|
|
|
|
|
VME PowerPC |
|
|
Single/Dual PowerPC Processors |
|
750/750GX/750FX/ 7447/7455/7457/7458 G4 with AltiVec |
|
Asymmetric Multiprocessing Architecture |
|
Ultra Compact Single Slot Solution
VME64x /2eSST (VXS) compliant
Dual chipset design for independent Processor Nodes
Upto 2GB DDR SDRAM with ECC for each Processor Node
Upto 16MB Mbytes on board Flash for each Processor Node
Upto 2 Serial Ports ,
SCSI - II, LPT ,
Upto 2 Fast Ethernet & Gigabit Ethernets (AFDX Ready) ,
Upto 2 PMC Expansion Slot ,
On-board MIL-STD-1553 (optional)
External Clock Synchronization
PCI over P0 (optional)
On-Board User Programmable FPGA
8 Timer Counters, 32 GPIO, RTC, Watchdog & Temp sensor
Independent InfiniBand host channel adapter with two independent 4x links
VxWorks, Linux, RTLinux, LynxOS, Time Sys, Integrity
Available in Commercial, Industrial, Rugged Air-cooled & Conduction Cooled Builds
|
|
|
|
|
|
|
Quantum3D |
 |
|
Sentiris™ PMC 4110 |
|
Sentiris™ PMC 4110, the most advanced COTS graphics |
|
subsystem ever developed for the embedded visual |
|
computing world. Created by Quantum3D™, the exclusive |
|
supplier of NVIDIA- based technologies for the embedded |
|
visual computing market- the Sentiris PMC 4110 is an |
|
|
IEEE 1386.1 compliant PCI Mezzanine Card that brings the power of the NVIDIA® Quadro™4 Embedded Graphics Processing Unit (GPU) to realtime military and commercial embedded visual computing applications which require the combination of high-performance, high-resolution multi-channel 2D and 3D graphics, advanced video input/output,
low-power consumption and extended or mil-spec environmental capabilities.
Compliant with the IEEE 1386.1 PCI Mezzanine Card standard, the Sentiris PMC 4110 is compatible with VME, CompactPCI, PC-104+ and other embedded form factor single board computers equipped with either
33 MHz or 66 MHz PMC slots (3.3 or 5V), which makes Sentiris PMC 4110 perfect for P3I applicationswhere technology insertion or preservation of the installed base infrastructure is important. Sentiris PMC
4110 supports Microsoft® Windows®2000, OpenGL® 1.2 (or Earlier) and DirectX® 8.0 on Intel® IA32™ Architecture Systems. Sentiris also supports OpenGL® 1.2 under Linux and popular Real Time Operating
Systems, including WindRiver® VxWorks® on both IA32 and PowerPC™ architecture systems. |
|
